Tag: construction of life

Varnish protects the surface from scratches and impact cleaning chemicals. Thorough pre-paint the door surface preparation helps to ensure a quality end result. The old surface was washed and flaking paint is removed. Irregularities shpatlyuyut, for example, alkyd putty Spakkeli, after which the surface is sanded until smooth. Ground surface napimer, Exy primer or swelling.

After priming produces a light sanding. Color produce, for example, paint empiricism. Stained conventional solid doors do not cause problems, but the paneled door is much harder to paint. Larger areas can be divided into several sections, if not the entire surface have time to paint until the paint has dried. On solid doors is recommended to apply the paint roller mohair, then straighten the surface yet with a wide brush.

When painting panel doors, first recommended to paint solid surface of the door. Excess paint spilled across the panels, remove the wet cloth. The output of the line tape makes it easy. Stained windows by changing the load of construction equipment and domestic water, and on the exterior window frames increases. Building denser than before, and, consequently, the moisture content in the air inside the building went up. Wooden box wood, used for window frames, not always from core, and the type of wood varies. In Finland, the industrial manufacturing, windows make up to full readiness, including the color at the factory. Unpainted windows deliver little. Most ready-stained windows, but only a small portion is treated with glaze. As a primer for factory use polyurethane primer and paint for a finishing – alkyd, or polyurethane paint katalitnye. Before entering to the color of windows should be check that the window frame was quite dry. At the same wood moisture should be less than 20% when measured at a depth of 5 mm. Before staining, sharp edges ukruglyayut polishing, then brush the surface clean from dust and dirt.

Claimed lifetime ceilings of 25 years. To create a comfortable environment in the office, which will enhance productivity, create a good spatial acoustic conditions. Suspended ceilings Geipel, in this case are irreplaceable. Due to the high absorption coefficient, as well as the possibility of producing the perforation of any diameter and configuration cassettes acoustic liner, metal ceilings Geipel help create the necessary atmosphere in the room acoustics, noise reduction, improving sound perception of speech, as well as significantly improve the working environment. In rooms with indirect light, as well as offices, designed to work with computers, it is important to create adequate lighting, comfortable to the eye.

Ceilings Geipel efficiently reflect and scatter light, creating the most comfortable environment. Finally, returning to the top of the article, mention should be made about such an important parameter as a design office environment. With a wide choice of types of suspended ceilings, office can be made in various stylistic decisions. Tape and suspended ceilings may have to have perforations of different diameters and densities. Originally ceilings look cellular, consisting of panels with round, oval, square or hexagonal openings. When you create a unique look office, if desired, the panel can be composed, creating a layered structure.

The panels can be equipped with built-in ceiling lights, designed in the same design. Wide range of colors, and different geometric shapes of modules can realize any modern architectural solutions. One of the unique solutions of ceiling systems is "shtrekmetall design", allows you to create aesthetically pleasing ceiling of any complexity. The panels in the style of "shtrekmetall" ceiling give an extraordinary lightness and height. Visually expand the space in the office will allow the spectacular mirrored ceilings Geipel, made of anodized and polished to a perfect shine of aluminum. Mirrored ceilings can mimic the color of silver, copper and gold, so you can create a sense of place in this luxury. Thus, the design Geipel, not only possess such properties as the practicality, environmental friendliness, durability and safety, but also help create a unique, aesthetically pleasing interior. Suspended ceilings Geipel are ideal for the office of a modern company, which invests his money wisely and care for the comfort and safety of its employees.

The basis for applying the decorative coating may be a wall of concrete, bricks, plasterboard, solid fiber board, particle board, all durable washable and resistant to abrasion old paint. The surface on which applied decorative plaster must be dry, clean, smooth as possible and not crumbling. Large defects need to putty. Valid shallow cracks and defects neobshirnye, not exceeding a depth of two thicknesses of deposited layers. Then, the surface should be covered with soil cementing. It must be done if the base rapidly absorbs water, such as plaster, porous, old, crumbling plaster. Decorative facade plasters – Thick cover it with a definite structure. The structure of the coating is determined by size and shape of particulate filler used tool, as well as technological methods of application.

The main advantages of their use include: – the requirements of careful preparation of several reasons reduced – high decorative properties of the coating – the plaster could be tinted in a wide range of colors – front cover have a high vapor permeability and mechanical – strength and resistance to Weatherproof – will facilitate further refurbishment of such coatings. Cover decorative plasters has finished appearance, but sometimes, to further improve performance and decorative qualities, plaster coating additionally painted. Paint the plaster coating, compared with smooth coatings require a much larger flow of paint. Decorative plaster themselves represent a significant material flow per unit area, therefore, such coatings have a high cost. Decorative facade plasters are an essential element of the external insulation systems. Choosing a plaster for the walls, the customer can be sure that you can get exactly what he expected: a designer have the opportunity to dream, to "play" with the material: to draw a picture, ornament, make a graphic figure. In order to reduce the cost of finishing and at the same time getting the color and style of interior solutions, you can trim parts of the room, alternating between the paint, plaster, mosaic and so on.